600 Volt UL Type MC-LS Low Smoke Zero Halogen Copper – HW321 50003 Nassau Cheap Sale

600 Volt UL Type MC-LS Low Smoke Zero Halogen Copper – HW321 50003

Technical Specifications:
Catalog Number	HW321 50003
Size AWG/kcmil	500
No. of Conductors	3
No. of Strands	37
Insulation Thickness	65
Ground Wire Size	2
Armor Diameter Inch	2.43
Jacket Thickness	85
Overall Diameter Inch	2.60
Net Weight Lbs/Mft	6041

Specifications:

• Impervious Continuously Welded Armor – Control Cable
• 600 Volt UL Type MC-LS, CT Use, 90°
• Low Smoke Zero Halogen Jacket
• Copper Conductors

Application:
LifeGuard™ Low Smoke Zero Halogen* cable is for use in power, control and lighting circuits in a broad range of commercial and industrial applications. The impervious armor provides maximum conductor protection and prevents the entrance of water, gas and corrosive elements into the electrical core. LifeGuard™ cable is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. It is ideal for applications where a high degree of safety and equipment protection is required.

LifeGuard™ cable is UL listed, Type MC-LS per UL Standard 1569 and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class 1, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Impervious continuously welded and corrugated aluminum armor is recommended as an economical alternative to wire in conduit systems.

LifeGuard™ cable is UL listed, Type MC-LS per UL Standard 1569 and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class 1, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Impervious continuously welded and corrugated aluminum armor is recommended as an economical alternative to wire in conduit systems.

Product Features:

• Tray rated
• Sunlight-resistant
• Approved for direct burial
• Very low smoke production when burned
• LifeGuard™ jacket produces zero halogens during fire – less toxic and corrosive
• LifeGuard™ jacket is environmentally safe – lead, sulfur and halogen free
• Highly chemical-resistant
• Very flame-retardant
• Burns to an ash – does not exhibit thermoplastic drip
• Excellent compression and impact resistance
• Superior tensile strength and abrasion resistance
• Flexible jacket with low coefficient of friction

Conductors:
Compressed soft annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation:
Cross-linked polyethylene (XLP) per ICEA S-95-658 and UL Standard 44 for Type XHHW conductors

Grounding Conductor: Soft annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1277

Armor:
Impervious continuously welded and corrugated aluminum

Jacket:
Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277

Flame Tests:

• IEEE 383 70,000 BTU/hr flame test
• IEEE 1202 70,000 BTU/hr flame test
• UL Standard 1685 70,000 BTU/hr Flame Propagation and Smoke Release Test
• ICEA T-29-520 210,000 BTU/hr flame test

Color Code:
ICEA Method 4

Additional Standards:

• NEMA WC70

*Some cable insulations may contain trace amounts of halogens.