Conductors: Soft annealed stranded tinned copper per ASTM B 33. A polyester tape separator is used over the conductor.
Insulation: Bostrig Type P chemically cross-linked polyolefin (XLPO), meeting IEEE 1580 (2001).
Ground Conductors: All Bostrig Type P-VFD Cables listed in this specification sheet are built using system grounds equal to the aggregate cross-section of a phase conductor and can be in contact withor isolated from the overall shield. A system ground is REQUIRED for supplying power from the switchboard to the inverter and then to the motor. If the VFD cable is only being used between the motor and the inverter, a cable with a lesser ground can be utilized.
Shield: Braided tinned copperand aluminum polyester tape for 100% coverage
Jacket: Flame-retardant Arctic Neoprene, complying with Type N Neoprene as required in IEEE-1580. Thickness as shown in tables on opposite page.
Armor (optional): Braided bronze in accordance with IEEE 1580.
Sheath: Flame-retardant Arctic Neoprene applied over the armor, complying with Type N Neoprene as required in IEEE 1580. Thickness as shown in tables on opposite page.
Applications:
• Bostrig™ Type P shielded three conductor VFD Marine and Offshore Cable is designed specifically for use with variable frequency AC motor drives. This cable is designed to significantly mitigate the deleterious effects of high frequency harmonics and electromagnetic interference (EMI) on the motor /drive system as well as the adjacent environment.
• Bostrig™ VFD cables have excellent resistance to oil, abrasion, moisture, vibration, sunlight, and ester based muds (Type P- MR). They are suitable for use in Class 1, Division 1 offshore applications (armored and sheathed) and complies with UL 1277 Type TC-ER extended runs requirements.
• The standard insulation has a continuous operating temperature of 125°C, allowing for higher ampacity levels. These cables also meet cold bend requirements of -40°C and cold impact of -35°C (CSA 22.2 N0. 0.3).
• This product may be manufactured in an unarmored or armored and sheathed version.
Approvals:
• IEEE 1580 and IEEE 45- Marine Shipboard Cable
• UL 1309- Marine Shipboard Cable Type X110
• CSA 22.2 No. 245- Marine Shipboard Cable Type X110
• Det Norske Veritas (DNV)
• American Bureau of Shipping (ABS)
• Transport Canada Approved AMS400-20-2
• Transport Canada 8700-20-2
• Lloyd’s Register of Shipping (LRS)
• United States Coast Guard-46CFR
Features/Ratings:
• Special ester-based mud resistant jacket also provides superior resistance to oil, abrasion, moisture, sunlight, crush and impact
• High strand count conductors provide superior flexibility
• Higher allowable conductor operating temperature results in increased ampacity
• Hold bend/ cold impact of -40°/ -35°C in accordance with CSA 22.2 No. 0.3
• Flame retardant in accordance with IEEE 1202 and IEC 60332-3-22 Category A
• Arctic neoprene jacket allows ease of stripping in all temperatures
• Meets IEEE standards for 2000V and performance requirements of IEC standards for 0.6/1kV
• This product may be manufactured in an unarmored or armored and sheathed version
• Armored and sheathed cables suitable for use in Class 1 Division 1 and Zone 1 hazardous locations offshore
• Unarmored cables suitable for use in Class I, Division 2 hazardous locations offshore
• Meets requirements for UL 1277 Type TC-ER for exposed runs
| technical specification: | |
| conductor size – awg/mcm | 2/0 |
|
conductor size- mm2
|
66.5 |
| type designation | tp(obs)n-2/0 |
| ground size – awg/mcm | 4 |
| ground size – mm2 | 21.5 |
| sheath thickness – in | n/a |
| sheath thickness – mm | n/a |
| cable diameter (nominal) – in | 1.620 |
| cable diameter (nominal) – mm | 41.1 |
| inductance – Ω/kft | 0.09 |
| inductance – Ω/km | 0.3 |
| capacitance – pf/ft | 212 |
| capacitance – pf/m | 695 |
| calculated ampacity† (measured @ ºc) – 95 | 175 |
| calculated ampacity† (measured @ ºc) – 100 | 186 |
| calculated ampacity† (measured @ ºc) – 110 | 201 |
| calculated ampacity† (measured @ ºc) – 125* | 254 |
| cable weight (approximate) – lbs/mft | 2730 |
| cable weight (approximate) – kg/km | 4065 |
| draka cable part number | 036029 |
Fast Shipping with Professional Packaging
We offer a broad range of shipping options due to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff is extremely skilled and will package your goods in accordance to our exact and precise specifications. Your products will go through a thorough inspection and be securely secured prior to being delivered. We deliver to thousands of customers every day across multiple countries. This is a testament to our commitment to be the biggest online retailer in the world. There are distribution centers as well as warehouses in Europe and the USA.
Orders that include more than one item are given processing time for each item.
We will carefully examine all items before sending. Today, the majority orders will be shipped within 48 hours. The delivery time will be between 3 and 7 working days.
Returns
Due to multiple parties, including the factory and the warehouse, we are unable to completely manage our stock. The levels of stock can change at any moment. Please understand it may happen that your order will be out of stock when your order has been made.
Our policy lasts for thirty days. Unfortunately, if the 30 days have elapsed from the date you purchased the item, we cannot offer you a return or exchange.
In order to be eligible for a return your product must be unopened and in the same condition as you received it in. It should also be in its original packaging.
Related products
Uncategorized
Uncategorized
Uncategorized
Uncategorized
Uncategorized
