1/0 35kV Power Cable 345 Mils
35kV Type MV-105 – 345 Mils EPR with PVC Jacket
Product Description:
This conductor is a UL listed Type MV (Medium Voltage) cable that is capable of transmitting ampacities up to 35,000 Volts. The conductive component of this cable is a concentric compact stranded class B copper conductor. The class B copper in this cable is annealed to make the conductor softer and more malleable. The conductor is covered by triple single head extruded conductor shield. The conductor shield is then insulated with a dry cured ethylene propylene (EPR) insulation that bears an easy strippable bare copper insulation shield. The bare copper insulation shield has an overlap of 25% and is made of 5 mils annealed copper. A black, surface printed polyvinyl chloride (PVC) jacket serves as the external layer of the cable. The exterior jacket is flame-retardant and moisture and sunlight resistant.
Applications:
The 35kV Type MV-105 – 345 Mils EPR with PVC Jacket cable is primarily used in distribution, main feeder and branch circuits for commercial, industrial, and electric utility installations. The cable can be installed in aerial applications, direct burial, conduit open tray, and underground duct installations. When installed in accordance with NEC regulations, the cable is safe for use in wet or dry locations. For direct burial applications, ensure the cable is installed in a system with a ground conductor that is in close proximity with NEC 250.4(A)(5). Under normal operating conditions, this cable is able to function at temperatures up to 105°C. At emergency operating conditions, the cable can tolerate temperatures up to 140°C. The cable has a temperature rating of 250°C in short circuit situations.
Specifications:
- In accordance with standards set forth by Underwriters Laboratories, this product meets or exceeds UL standard 1072. This standard sets the expectations for shielded and unshielded. Specifications require this cable to be able to function at temperatures.
- This cable is Underwriters Laboratories listed as Type MV-105. MV-105 stands for the voltage (Medium Voltage) and the maximum operating temperature (105°C).
- This cable meets UL standard 1685. This standard required the product to pass a flame exposure test in which the total smoke released is to be 95 m2 or less and the peak smoke release rate is to be 0.25 m2/s or less. The cable char height is to be less than 8 ft, 0 inch (244 cm) when measured from the bottom of the cable tray in accordance with Section 8.
- The cable passes the IEEE 1202 flame test, a test designed to measure the flame resistance qualities of cable in cable tray.
- This cable is deemed acceptable by Occupational Safety and Health Administration.
Construction:
– Conductor
- The conductive component of this cable is a concentric compact stranded class B copper conductor. The class B copper in this cable is annealed to make the conductor softer and more malleable.
– Extruded Strand Shield
- The extruded thermoset semi-conducting strand shield is a layer over the conductor that controls stress on the conductor.
– Insulation
- The cable is insulated with Ethylene Propylene Rubber insulation.
– Extruded Insulation Shield
- The extruded insulation shield is a thermoset semi-conducting polymeric layer free stripping from insulation.
– Metallic Shield
- The metallic shield is a copper tape that covers the insulation. The tape is 5 mils annealed copper with an overlap of 25%.
– Jacket
- The outer jacket is a black PVC jacket. The PVC jacket is flame-retardant and moisture and sunlight resistant.
| Technical Specifications: | |
| Number of Conductors in Cable: | 1 |
| Jacket Thickness (mils): | 70 |
| Nominal Insulation Thickness (mm): | 345 |
| Size AWG: | 1/0 |
| Stranding (Al/Stl): | 19 |
| Diameter Over Insulation (Inches): | 1.110 |
| Diameter Over Insulation Shield (Inches): | 1.200 |
| Diameter Complete Cable (O.D.) (Inches): | 1.390 |
| Weight Per 1000ft Total (Lbs.): | 1180 |
| Ampacity 1/C in Cable Tray (Amps): | n/a |
| Ampacity 1/C Conduit in Air (Amps): | 215 |
| Allowable Ampacity in Ducts (Amps): | 215 |
| General Cable Part # | 17061.13511 |
| Omni Cable Part # | MVE41/001 |
| Southwire item Part # | 555839 |
Fast Shipping with Professional Packaging
We offer a broad range of shipping options due to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff is extremely skilled and will package your goods in accordance to our exact and precise specifications. Your products will go through a thorough inspection and be securely secured prior to being delivered. We deliver to thousands of customers every day across multiple countries. This is a testament to our commitment to be the biggest online retailer in the world. There are distribution centers as well as warehouses in Europe and the USA.
Orders that include more than one item are given processing time for each item.
We will carefully examine all items before sending. Today, the majority orders will be shipped within 48 hours. The delivery time will be between 3 and 7 working days.
Returns
Due to multiple parties, including the factory and the warehouse, we are unable to completely manage our stock. The levels of stock can change at any moment. Please understand it may happen that your order will be out of stock when your order has been made.
Our policy lasts for thirty days. Unfortunately, if the 30 days have elapsed from the date you purchased the item, we cannot offer you a return or exchange.
In order to be eligible for a return your product must be unopened and in the same condition as you received it in. It should also be in its original packaging.
Related products
Uncategorized
Uncategorized
Uncategorized