PowrPak Flat Strap 750MCM 15 kV Concentric Neutral LLDPE Jacket Underground PILC Replacement Cable Cu Conductor EPR Insulation
Complete Cable: Cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over stranded copper conductor and cured in a single operation. Uncoated copper flat strap neutrals (helically applied) and extruded-to-fill black jacket are applied over the cable core. PowrPak® cables meet the latest ANSI/ICEA S-94-649 and AEIC CS8 specifications for Ethylene Propylene Rubber (EPR) insulated concentric neutral cable except for dimensional requirements.
Conductor: STRANDFILL®, bare, compact, concentric lay stranded copper tested in accordance with ICEA T-31-610.
Conductor Shield: Extruded semi-conducting thermosetting polymeric stress control layer.
Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and III.
Insulation Shield: Extruded semi-conducting thermosetting layer, clean and free stripping from insulation.
Copper Flat Straps: Bare annealed copper flat strap neutrals designed to meet customer fault current requirements.
Jacket: Black, non-conducting Linear Low-Density Polyethylene (LLDPE) extruded to fill spaces between flat straps.
Features and Benefits:
• Reduced overall diameter for tight duct applications without reducing insulation wall
• No environmental concerns
• Higher emergency ampacity capabilities
• Less costly than PILC
• Millions of feet successfully installed and operated since its introduction in 1989
• Triple-extruded for clean interfaces
• Class 10,000 environment utilized for cable core material handling
• Flexibility for easy handling
• Excellent moisture resistance
• Improved temperature rating over PILC
• Low dielectric loss
• Deformation-resistant
• High dielectric strength
• Excellent resistance to water treeing
• Clean-stripping insulation shield without the use of a release agent
Temperature Rating:
• Normal . . . . . . . . . . . . . . . . . . . . . . . . .105°C
• Emergency* . . . . . . . . . . . . . . . . . . . . . .140°C
• Short Circuit . . . . . . . . . . . . . . . . . . . . .250°C
* Operation at the emergency overload temperature shall not exceed 1500 hours cumulative during the lifetime of the cable.
Applications: PowrPak® cables are intended for use in dry or wet locations for today’s aging and expanding urban underground distribution systems of utilities where PILC has been used previously. It is specifically designed to be used in urban underground network systems where existing duct space is limited.
Options:
• Class C copper conductors
• Reduced insulation wall thickness
• BIFILL® blocked conductor and cable core/ jacket. Tested in accordance with ICEA T-34-664
• Dry nitrogen cure
• True Triple Extrusion
• Red stripes on jacket
• Deformation-resistant polypropylene jacket
• 3 X 1/C triplex or parallel
• Lead-free filled EAM insulation
• TRXLPE insulation
| technical specification: | |
| compact conductor(cu awg or kcmil) | 750 |
| compact conductor(min. no. of wires) | 58 |
| flat strap shield (1)(no. of straps) | 16 |
| flat strap shield(1)(thkn. mils) | 20 |
| flat strap shield (1)(width mils) | 175 |
| nominal o.d. inches(ins. ± 25mils) | 1.298 |
| nominal o.d. inches(ins. shield ± 30mils) | 1.358 |
| nominal o.d. inches(flat strap) | 1.398 |
| nominal o.d. inches(encap jacket ± 50 mils) | 1.498 |
| nom. jacket thkn. inches | 0.050 |
| approx. weight lb/1000ft(cu cond) | 2316 |
| approx. weight lb/1000ft(cu shield) | 237 |
| approx. weight lb/1000ft(total) | 3120 |
| amp. in duct (2) | 615 |
| duct clearance (3)(duct i.d. inches) | 4.0 |
| ductclearance (3)(min. clear inches) | 0.75 |
Fast Shipping with Professional Packaging
We offer a broad range of shipping options due to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff is extremely skilled and will package your goods in accordance to our exact and precise specifications. Your products will go through a thorough inspection and be securely secured prior to being delivered. We deliver to thousands of customers every day across multiple countries. This is a testament to our commitment to be the biggest online retailer in the world. There are distribution centers as well as warehouses in Europe and the USA.
Orders that include more than one item are given processing time for each item.
We will carefully examine all items before sending. Today, the majority orders will be shipped within 48 hours. The delivery time will be between 3 and 7 working days.
Returns
Due to multiple parties, including the factory and the warehouse, we are unable to completely manage our stock. The levels of stock can change at any moment. Please understand it may happen that your order will be out of stock when your order has been made.
Our policy lasts for thirty days. Unfortunately, if the 30 days have elapsed from the date you purchased the item, we cannot offer you a return or exchange.
In order to be eligible for a return your product must be unopened and in the same condition as you received it in. It should also be in its original packaging.
Related products
Uncategorized
Uncategorized
Uncategorized
Uncategorized
