Helukabel 18 AWG 10 Cores With GN-YE Conductor JZ-500 HMH Flexible Control Cable Halogen Free Oil Resistant Meter Marking Cable 11247 Helukabel Cheap Sale

Helukabel 18 AWG 10 Cores With GN-YE Conductor JZ-500 HMH Flexible Control Cable Halogen Free Oil Resistant Meter Marking Cable 11247

Technical Data:
• Halogen-free flexible control cable adapted to DIN VDE 0285-525-2-51 / DIN EN 50525-2-51 and DIN VDE 0285-525-3-11 / DIN EN 50525-3-11

Temperature Range:
• flexing -15°C to +70°C
• fixed installation -40°C to +70°C

Nominal Voltage:
• U0/U 300/500 V

Test Voltage:
• 2000 V

Minimum Bending Radius:
• flexing 12,5x cable Ø
• fixed installation 4x cable Ø

Radiation Resistance:
• up to 100×106 cJ/kg (up to 100 Mrad)

Cable Structure:
• Bare copper conductor, to DIN VDE 0295 cl.5, fine wire, BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of halogen-free polymer compound type TI6 to DIN VDE 0207-363-7 / DIN EN 50363-7
• Core identification to DIN VDE 0293 black cores with continuous white numbering
• GN-YE conductor, 3 cores and above in the outer layer
• Cores stranded in layers with optimal lay length
• Outer sheath of halogen-free polymer compound type TM7 to DIN VDE 0207-363-8 / DIN EN 50363-8
• Outer Sheath colour: grey (RAL 7001)
• With meter marking
• LS0H= Low Smoke Zero Halogen

Properties:
• 1) For the critical applications we advise for consultation
• The materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers

Tests:
• Flame test acc. to DIN VDE 0482-332-3-24, BS 4066 part 3, DIN EN 60332-3-24, IEC 60332-3-24 (previously DIN VDE 0472 part 804 test method C)
• Self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (equivalent DIN VDE 0472 part 804 test method B)
• Corrosiveness of combustion gases acc. to DIN VDE 0482-754-2, DIN EN 60754-2, IEC 60754-2 (previously DIN VDE 0482-267-2-2)
• Halogen-free acc. to DIN VDE 0482-754-1, DIN EN 60754-1, IEC 60754-1 (previously DIN VDE 0482-267-2-1)
• Smoke density acc. to DIN VDE 0482 part 1034-1+2, DIN EN 61034-1+2, IEC 61034-1+2, BS 7622 part 1+2

Note:
• G = with GN-YE conductor x = without GN-YE conductor (OZ)
• AWG sizes are approximate equivalent values. The actual cross section is in mm².
• Please note “cleanroom qualified” when ordering.
• Screened analogue type: JZ-500 HMH-C

Application:
Used as measuring, monitoring and control cables in tool machinery, conveyor belts, production lines, in plant, in air-conditioning, in foundries and steel mills. For fixed installation or flexible application, casual, not constantly recurring free movement without forced motion and without tensile stress, for medium mechanical stress. The cable is suitable for use in dry, damp and wet locations and on plaster.
= Product conforms with Low-Voltage Directive 2014/35/EU.