Helukabel 10 AWG 5 Cores JZ-500 HMH-C With GN-YE Conductor Flexible Control Halogen Free Cu-Screened EMC-Preferred Type Cable 11784 Helukabel Cheap Sale

Technical data: 
• Halogen-free core flexible control cable adapted to DIN VDE 0285-525-2-51/DIN EN 50525-2-51 and DIN VDE 0285-525-3-11/DIN EN 50525-3-11 

Temperature range: 
• Flexing -15°C to +70°C 
• Fixed installation -40°C to +70°C 

Nominal voltage: 
• U0/U 300/500 V 

Test voltage: 
• 2000 V 

Coupling resistance: 
• Max. 250 Ohm/km 

Minimum bending radius: 
• Flexing 12,5x cable Ø 
• Fixed installation 4x cable Ø 

Radiation resistance: 
• Up to 100×106 cJ/kg (up to 100 Mrad) 

Cable structure: 
• Bare copper conductor, to DIN VDE 0295 cl.5, fine wire, BS 6360 cl.5, IEC 60228 cl.5 
• Core insulation of halogen-free polymer compound type TI6 to DIN VDE 0207-363-7 / DIN EN 50363-7 
• Core identification to DIN VDE 0293 black cores with continuous white numbering 
• GN-YE conductor, 3 cores and above in the outer layer 
• Cores stranded in layers with optimal lay length 
• Separating foil 
• Tinned copper braided screen, approx. 85% coverage 
• Outer sheath of halogen-free polymer compound type TM7 to DIN VDE 0207-363-8 / DIN EN 50363-8 
• Sheath colour: grey (RAL 7001) 
• With meter marking 
• LS0H= Low Smoke Zero Halogen 

Properties: 
• We recommend you for critical applications a consultation 
• The materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers 

Tests: 
• Flame test acc. to DIN VDE 0482-332-3-24, BS 4066 part 3, DIN EN 60332-3-24, IEC 60332-3-24 (previously DIN VDE 0472 part 804 test method C) 
• Self-extinguishing flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (equivalent DIN VDE 0472 part 804 test method B) 
• Corrosiveness of combustion gases acc. to DIN VDE 0482-754-2, DIN EN 60754-2, IEC 60754-2 (previously DIN VDE 0482-267-2-2) 
• Halogen-free acc. to DIN VDE 0482-754-1, DIN EN 60754-1, IEC 60754-1 (previously DIN VDE 0482-267-2-1) 
• Smoke density acc. to DIN VDE 0482 part 1034-1+2, DIN EN 61034-1+2, IEC 61034-1+2, BS 7622 part 1+2 

Note: 
• G = with GN-YE conductor x = without GN-YE conductor (OZ) 
• Clean room qualification tested with analog type. Please note “clean room qualified” when ordering. 
• AWG sizes are approximate equivalent values. The actual cross section is in mm² 
• Unscreened analogue type: JZ-500 HMH 

Application: 
• Halogen-free, flame retardant control cables are used for instrumentation and control cables in tooling machinery, conveyor and transportation belts, production lines, in plant construction, air-conditioning systems as well as in iron and steel works. For fixed installation or for flexing applications, for casual, not constantly recurring free movement without forced motion and without tensile stress for medium mechanical loads. The cable is suitable for use in dry, damp and wet environments and on plaster. An interference-free transmission of signals and pulse in assured by the high degree of
screening. EMC = Electromagnetic compatibility To optimize the EMC features we recommend a large round contact of the copper braiding on both ends. = Product conforms with Low-Voltage Directive 2014/35/EU.