Helukabel 18 AWG 2 Cores Multiflex 512-C-PUR UL/CSA Special For Drag Chains, Two Approvals Control EMC-Preferred Type 80C 600V Cable 21652 Helukabel Cheap Sale

Technical Data: 
• Special drag chain cables for extreme mechanical stress to UL-Style 20939 

Temperature Range: 
• Flexing -30°C to +80°C 
• Fixed installation -40°C to +80°C 

Nominal Voltage: UL/CSA 600 V 

Test voltage: 3000 V 

Insulation Resistance: Min. 100 MOhm x km 

Minimum Bending Radius: 
• Flexing 7,5x cable Ø 
• Fixed installation 4x cable Ø 

Alternating Bending Test: Tested with approx. 10 million bending cycles 

Radiation Resistance: Up to 50×106 cJ/kg (up to 50 Mrad) 

Coupling Resistance: Max. 250 Ohm/km 

Cable Structure: 
• Bare copper, extra fine wire conductors, bunch stranded to DIN VDE 0295 cl.6, col. 4, BS 6360 cl.6 and IEC 60228 cl.6 
• Core insulation of special PP 
• Core identification to DIN VDE 0293 black cores with continuous white numbering 
• GN-YE conductor, 3 cores and above in the outer layer 
• Cores stranded in layers with optimal selected lay-length 
• Special core wrapping over each layers and an additional fleece over outer layer 
• TPE-inner sheath, halogen-free 
• Wrapping with special tapes 
• Tinned copper braided screening, approx. 85% coverage 
• Special core wrapping of fleece (up to 4 mm² without core wrapping over the outer layer) 
• Outer sheath of special full-polyurethaneTMPU, to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 
• Sheath colour grey (RAL 7001) 
• With meter marking 

Properties: 
• Very good oil resistant 
• Guaranteed permanent application in multi-shift operation under extreme high bending stress 
• Adhesion-low 
• High resistant to mechanical strain 
• High property of alternating bending strength 
• Long lifedurabilities through low fiction-resistance by using the TPE insulation 
• High tensile strength-, abrasion and impact resistant at low temperature 
• Resistant to Weather, Ozone, UV-radiation, Solvents, Acids and Alkalis, Hydraulic liquidity and Hydrolysis 
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers 

Tests: 
• PUR-sheath flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B),UL VW-1, CSA FT1 

Note: 
• G = with green-yellow conductor, x = without green-yellow conductor (OZ)
• AWG sizes are approximate equivalent values. The actual cross-section is in mm² 
• Please note the cleanroom qualification when ordering. 
• Unscreened analogue type: MULTIFLEX 512 PUR UL/CSA 

Application: 
• The special screened UL/CSA cables for drag chains are mainly applied for impulse transmission to prevent external interference effects and used for
permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts and multi-shift operation.
Those cables are developed according to the newest state of technology improvement. These high flexible control cables with sliding abilities guaranteed
an optimum service life durabilities and also very economic by using the PP-core insulation and the PUR-outer sheath which is adhesive-free and
cut-resistant. EMC = Electromagnetic compatibillity To optimize the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low Voltage Directive 2006/95/EC.